Anycubic Kobra S1 Combo with ACE 2 Pro – Multicolour CoreXY 3D Printer
Fast, fully enclosed multicolour printing, right out of the box. The Kobra S1 Combo pairs a high-speed CoreXY printer with the ACE 2 Pro multi-colour and drying unit. It’s a complete multicolour setup for makers, hobbyists and designers who’ve outgrown single-colour printing.
Multicolour from day one. The included ACE 2 Pro feeds 4 colours, and you can expand to as many as 16 colours with more ACE units. It’s ideal for colourful models, figurines, signage and multi-material parts.
Seriously fast. A rigid CoreXY frame prints at up to 600mm/s with 20,000mm/s² acceleration, so big jobs finish in a fraction of the time.
Dry filament, better prints. The ACE 2 Pro dries filament at up to 65°C, even while printing. A built-in humidity sensor and moisture vent keep it dry to stop the stringing, bubbling and weak layers that damp filament causes.
Fewer failed prints. A built-in camera uses AI spaghetti detection to catch failed prints early. Filament runout detection with auto-resume and power-loss recovery protect long jobs. If one part fails, object skip lets you cancel just that part and keep the rest printing.
Set up and print. Fully automatic levelling means no manual Z-offset adjustment, so you can start printing soon after unboxing.
Enclosed, filtered and quiet. The enclosed chamber has an activated carbon filter for printing ABS and ASA. Quiet mode runs at 44 dB or less.
Control from anywhere. Use the 4.3″ touchscreen, or connect over Wi-Fi to monitor and control prints remotely with the Anycubic App or AC Cloud, with time-lapse recording from the chamber camera. It works with Anycubic Slicer Next and OrcaSlicer.
Backed by a 12-month manufacturer warranty.
Key features
- ACE 2 Pro included: 4 colours as standard, expandable to 16
- CoreXY motion: up to 600mm/s, 20,000mm/s² acceleration
- Active filament drying up to 65°C with humidity sensing
- Fully automatic levelling
- AI spaghetti detection with built-in chamber camera and time-lapse
- Filament runout detection, auto-resume and power-loss recovery
- Hotend up to 320°C, heated bed up to 120°C
- Prints PLA, PETG, ABS, ASA and TPU
- Enclosed chamber with activated carbon filtration
- Quiet mode at 44 dB or less
- App, cloud, touchscreen or USB control
Specifications
- Printing technology: FDM
- Build volume: 250 × 250 × 250mm
- Layer thickness: 0.08 – 0.28mm
- Max print speed: 600mm/s
- Max acceleration: 20,000mm/s²
- Multicolour: 4 colours (included ACE 2 Pro), expandable to 16
- Compatible filaments: PLA, PETG, ABS, ASA, TPU
- Filament drying: up to 65°C
- Nozzle: 0.4mm brass, quick-swap (0.2 / 0.6 / 0.8mm compatible)
- Max nozzle temperature: 320°C
- Max bed temperature: 120°C
- Frame: CoreXY
- Extruder: dual-gear direct drive
- Z-axis: single motor, three guide rods
- Levelling: fully automatic
- Safety: AI spaghetti detection, filament runout detection with auto-resume, power-loss recovery, object skip
- Camera: built-in chamber camera with time-lapse
- Touchscreen: 4.3″ capacitive
- Noise level: ≤46 dB (standard), ≤44 dB (quiet mode)
- Connectivity: Wi-Fi (2.4 GHz), USB drive, AC Cloud, Anycubic App
- Slicer software: Anycubic Slicer Next, OrcaSlicer
- File formats: STL, OBJ, 3MF in; G-code out
- Firmware: Kobra OS
- Power input: 100–120V / 200–240V
- Printer dimensions: 400 × 410 × 490mm
- Printer weight: 18kg
- ACE 2 Pro dimensions: 368 × 291 × 236mm
- ACE 2 Pro weight: 3.7kg
- Warranty: 12 months
What’s in the box
- Kobra S1 printer
- ACE 2 Pro unit
- Spool holder
- Signal cable
- 4 × filament tubes
- 2 × M3×6 screws, 2 × M2.5×25 screws
- Grease
- Hex keys (2.5 / 2.0 / 1.5mm)
- Nozzle cleaner and nozzle cleaning module
- Nozzle silicone sock
- Anti-blocking module
- Activated carbon filter
- Filament sample
- 2 × power cords
- 2 × cable organisers
