Anycubic PC Filament – White (1kg)
Engineering-grade polycarbonate | Heat resistant to 110°C | High strength and toughness | Smooth, glossy finish | For high-temperature, enclosed printers
Engineering-grade strength for parts that need to work hard. Anycubic PC (polycarbonate) is one of the toughest, most heat-resistant materials you can 3D print. It goes well beyond PLA, PETG and ABS, so it’s the choice for functional parts that face heat, stress and everyday wear.
Handles serious heat. With a heat deflection temperature of 110°C, PC parts keep their shape where PLA (about 52°C) and PETG (about 70°C) would soften. That makes it suitable for car interiors, parts near motors or electronics, and anything left in the sun.
Strong and tough. It has a tensile strength of 65 MPa and flexural strength of 105 MPa, so parts are rigid and resist cracking. It’s ideal for brackets, mounts, gears, enclosures, jigs and electronic housings.
Smooth, glossy finish. PC prints with a smooth, lustrous surface that looks clean and professional.
Smart spool. It’s compatible with the Anycubic ACE system and Anycubic’s spool identification, and comes on a reusable spool.
Key features
- Engineering-grade polycarbonate
- Heat deflection temperature of 110°C
- High strength: 65 MPa tensile, 105 MPa flexural
- Tough and crack-resistant
- Smooth, glossy surface finish
- Anycubic ACE compatible, with spool identification support
- Reusable spool
Printer requirements
- Hotend that reaches at least 290°C
- Heated bed that reaches 100–120°C
- Enclosed printer strongly recommended. PC warps and cracks in open air.
- Dry the spool before every use
Specifications
- Material: PC (polycarbonate)
- Colour: white
- Net weight: 1kg
- Nozzle size: 0.2mm or larger
- Printing temperature: 270–290°C
- Bed temperature: 100–120°C
- Recommended print speed: 40–250mm/s
- Max flow rate: 12mm³/s
- Drying: required before use, 80°C for 8–12 hours
- Density: 1.2 g/cm³
- Melt index: 15–20 g/10 min (270°C / 1.2kg)
- Melting point: 230°C
- Vicat softening temperature: 122°C
- Heat deflection temperature: 110°C (0.45 MPa)
- Tensile strength: 65 ± 6 MPa (X-Y), 25 ± 7 MPa (Z)
- Young’s modulus: 2,550 ± 100 MPa
- Elongation at break: 9 ± 4%
- Flexural strength: 105 ± 10 MPa
- Flexural modulus: 2,900 ± 150 MPa
- Izod impact strength (X-Y): 30 ± 12 kJ/m²
- ACE compatible: yes
- Spool identification: supported
- Reusable spool: yes
Tips for best results
-
Always dry before printing, at 80°C for 8–12 hours. PC absorbs moisture quickly, and damp PC bubbles, strings and prints weak.
- Print in an enclosed printer with the door closed, and keep drafts away.
- Use an adhesive such as glue stick on the bed for good first-layer grip.
- Ventilate the room while printing.
What’s in the box
- 1 × Anycubic PC Filament – White (1kg spool)
