Anycubic PLA High Speed Filament – Bright White (1.75mm, 1kg)
Made for high-speed printing | Smooth, consistent flow | Clean bright white | Works with any 1.75mm FDM printer | ACE compatible
PLA built for speed. Anycubic PLA High Speed is made for today’s fast printers. It flows easily and cools quickly, so you can print much faster than with standard PLA without losing surface quality. It works just as well on standard printers.
Print fast. It’s rated for speeds up to 600mm/s on compatible high-speed printers like the Anycubic Kobra S1 and Kobra 3 Max, and it stays consistent at everyday speeds.
Clean, bright white. This crisp white suits household parts, organisers, prototypes, architectural models and prints you plan to paint. It’s ideal for quick batch printing.
Clean, reliable prints. It’s tough with low shrinkage, so you get smooth surfaces and parts that hold their shape. The consistent diameter helps it feed smoothly, with fewer clogs and less under-extrusion.
Multicolour ready. It’s compatible with the Anycubic ACE system, and spool identification sets the print settings automatically on compatible Anycubic printers. The spool is reusable.
Key features
- Built for high-speed printing, rated up to 600mm/s on compatible printers
- Smooth flow and fast cooling for clean surfaces
- Clean, bright white
- Tough, low shrinkage, holds its shape
- Consistent diameter for smooth feeding
- Works with any 1.75mm FDM printer, high-speed or standard
- Anycubic ACE compatible, with automatic settings on compatible printers
- Reusable spool
Specifications
- Material: PLA (high speed)
- Colour: bright white
- Diameter: 1.75mm
- Net weight: 1kg
- Nozzle size: 0.2mm or larger
- Printing temperature: 190–260°C
- Bed temperature: 55–65°C
- Recommended speed by temperature:
- 190–210°C: 50–150mm/s
- 210–230°C: 150–300mm/s
- 230–260°C: 300–600mm/s
- Max flow rate: 18mm³/s
- Density: 1.19 g/cm³
- Melt index: 13–16 g/10 min (190°C / 2.16kg)
- Melting point: 157°C
- Heat deflection temperature: 52°C (0.45 MPa)
- Tensile strength: 45 ± 5 MPa (X-Y), 22.1 ± 0.6 MPa (Z)
- Young’s modulus: 2,750 ± 260 MPa
- Elongation at break: 9 ± 1%
- Flexural strength: 82 ± 8 MPa
- Flexural modulus: 3,905 ± 300 MPa
- Izod impact strength (X-Y): 21 ± 1 kJ/m²
- ACE compatible: yes
- Spool identification: supported
- Reusable spool: yes
Tips for best results
- Dry the spool at 45–50°C for 6–8 hours, especially if it’s been open for a while.
- Store it sealed with desiccant when you’re not using it.
- PLA softens at around 52°C, so don’t leave prints in a hot car or direct sun.
What’s in the box
- 1 × Anycubic PLA High Speed Filament – Bright White (1kg spool)
