Anycubic PLA High Speed Filament – Pearl Black (1.75mm, 1kg)
Made for high-speed printing | Smooth, consistent flow | Pearl-black shimmer finish | Works with any 1.75mm FDM printer | ACE compatible
PLA built for speed. Anycubic PLA High Speed is made for today’s fast printers. It flows easily and cools quickly, so you can print much faster than with standard PLA without losing surface quality. It works just as well on standard printers.
Print fast. It’s rated for speeds up to 600mm/s on compatible high-speed printers like the Anycubic Kobra S1 and Kobra 3 Max, and it stays consistent at the speeds you print at every day.
Pearl-black finish. A deep black with a subtle pearl shimmer gives prints a premium look straight off the bed. It’s great for decorative pieces, cosplay parts, fan art and gifts.
Clean, reliable prints. It’s tough with low shrinkage, so you get smooth surfaces and parts that hold their shape. The consistent diameter helps it feed smoothly, with fewer clogs and less under-extrusion.
Multicolour ready. It’s compatible with the Anycubic ACE system for multicolour printing, and the spool is reusable.
Key features
- Built for high-speed printing, up to 600mm/s on compatible printers
- Smooth flow and fast cooling for clean surfaces
- Pearl-black shimmer finish
- Tough, low shrinkage, holds its shape
- Consistent diameter for smooth feeding
- Works with any 1.75mm FDM printer, high-speed or standard
- Anycubic ACE compatible
- Reusable spool
Specifications
- Material: PLA (high speed)
- Colour: pearl black
- Diameter: 1.75mm
- Net weight: 1kg
- Nozzle size: 0.2mm or larger
- Printing temperature: 190–260°C
- Bed temperature: 55–65°C
- Recommended speed by temperature:
- 190–210°C: 50–150mm/s
- 210–230°C: 150–300mm/s
- 230–260°C: 300–600mm/s
- Max flow rate: 18mm³/s
- Density: 1.19 g/cm³
- Melt index: 13–16 g/10 min (190°C / 2.16kg)
- Melting point: 157°C
- Heat deflection temperature: 52°C (0.45 MPa)
- Tensile strength: 45 ± 5 MPa (X-Y), 22.1 ± 0.6 MPa (Z)
- Young’s modulus: 2,750 ± 260 MPa
- Elongation at break: 9 ± 1%
- Flexural strength: 82 ± 8 MPa
- Flexural modulus: 3,905 ± 300 MPa
- Izod impact strength (X-Y): 21 ± 1 kJ/m²
- ACE compatible: yes
- Reusable spool: yes
Tips for best results
- Dry the spool at 45–50°C for 6–8 hours before use, especially if it’s been open for a while.
- Store it sealed with desiccant when you’re not using it.
- PLA softens at around 52°C, so don’t leave prints in a hot car or in direct sun.
What’s in the box
- 1 × Anycubic PLA High Speed Filament – Pearl Black (1kg spool)
