Anycubic PLA Matte Filament – Black (1.75mm, 1kg)
Smooth matte finish that hides layer lines | Supports peel off cleanly | Easy to print | Works with any 1.75mm FDM printer | ACE compatible
Display-quality prints with less clean-up. Anycubic PLA Matte has a fine, even matte texture that hides layer lines, so prints look smooth and realistic straight off the bed. It’s ideal for figurines, sculptures, models and décor.
Hides layer lines. The matte surface softens the stepped look of layers, so prints look cleaner and more like a finished product without sanding or painting.
Clean support removal. Supports peel away easily and leave a smooth contact surface, so there’s much less tidying up.
Deep matte black. A rich, non-reflective black gives prints a sleek, premium look. It’s great for display models, tech and sci-fi props, cosplay armour, desk accessories and anything you want to look like a finished product.
Easy to print. It prints at 190–230°C and 50–250mm/s on any 1.75mm FDM printer. On compatible Anycubic printers, spool identification sets the print settings for you automatically.
Key features
- Matte finish that hides layer lines
- Supports peel off cleanly
- Deep matte black, a premium non-reflective look
- Works with any 1.75mm FDM printer (0.2mm nozzle or larger)
- Automatic settings on compatible Anycubic printers
- Anycubic ACE compatible
- Reusable spool
- RoHS and REACH compliant
Specifications
- Material: PLA (matte)
- Colour: black
- Diameter: 1.75mm
- Net weight: 1kg
- Nozzle size: 0.2mm or larger
- Printing temperature: 190–230°C
- Bed temperature: 60–65°C
- Recommended print speed: 50–250mm/s
- Max flow rate: 12mm³/s
- Drying: recommended, 55–65°C for 6–8 hours
- Density: 1.25 g/cm³
- Melt index: 8 ± 3 g/10 min (190°C / 2.16kg)
- Melting point: 163°C
- Vicat softening temperature: 57°C
- Heat deflection temperature: 54°C (0.45 MPa)
- Tensile strength: 38 ± 2 MPa (X-Y), 12 ± 2 MPa (Z)
- Young’s modulus: 2,600 ± 150 MPa
- Elongation at break: 13 ± 4%
- Flexural strength: 67 ± 2 MPa
- Flexural modulus: 3,200 ± 100 MPa
- Izod impact strength (X-Y): 19 ± 1 kJ/m²
- ACE compatible: yes
- Spool identification: supported
- Reusable spool: yes
Tips for best results
- Dry the spool at 55–65°C for 6–8 hours if it’s been open for a while.
- Store it sealed with desiccant when you’re not using it.
- PLA softens at around 54°C, so keep prints out of hot cars and direct sun. That matters even more for black, which heats up fastest in the sun.
- Matte PLA is made for looks. For parts that need to take load, use PLA High Speed, PETG or PETG-CF.
What’s in the box
- 1 × Anycubic PLA Matte Filament – Black (1kg spool)
