Anycubic PLA Silk Dual Filament – Pink/Gold (1.75mm, 1kg)
Two colours in one strand | Shifts between pink and gold as you move around it | Lustrous silk finish | No colour changes or extra hardware needed | ACE compatible
Two colours, one spool, zero effort. Anycubic PLA Silk Dual combines soft pink and warm gold side by side in a single strand of silk PLA. As you walk around a print, it shows pink from one angle and gold from another, with a glossy silk sheen throughout. You get an elegant two-tone effect from any ordinary single-nozzle printer.
Rose-gold glamour. The sweet pink and shimmering gold pairing gives a luxurious rose-gold feel. It’s ideal for jewellery dishes and trinket boxes, vases, flowers, wedding and baby-shower décor, Valentine’s and Mother’s Day gifts, and cute figurines. Each print looks different depending on where you stand.
Silky shine straight off the bed. The silk finish gives a premium, almost metallic sheen, with no painting or post-processing needed.
Tune the shine. Print hotter or slower for a high-gloss finish, or cooler and faster for a softer lustre.
Easy to print. It works on any 1.75mm FDM printer with a 0.4mm or larger nozzle, with no multicolour system needed. On compatible Anycubic printers, spool identification sets the print settings for you automatically.
Key features
- Pink and gold side by side in one strand
- Colour changes with the viewing angle
- Glossy silk finish
- Adjustable shine through temperature and speed
- Works on any 1.75mm FDM printer, with no multicolour hardware needed
- Anycubic ACE compatible, with automatic settings on compatible printers
- Reusable spool
- RoHS and REACH compliant
Specifications
- Material: PLA (silk, dual-colour)
- Colour: pink / gold
- Diameter: 1.75mm
- Net weight: 1kg
- Nozzle size: 0.4mm or larger
- Printing temperature: 210–240°C
- Bed temperature: about 55°C
- Recommended print speed: 50–250mm/s
- Max flow rate: 8mm³/s
- Drying: recommended, 55–65°C for 6–8 hours
- Density: 1.22 g/cm³
- Melt index: 9 ± 1 g/10 min (190°C / 2.16kg)
- Melting point: 164°C
- Vicat softening temperature: 54°C
- Heat deflection temperature: 53°C (0.45 MPa)
- Tensile strength: 37 ± 4 MPa (X-Y), 12 ± 4 MPa (Z)
- Young’s modulus: 2,000 ± 200 MPa
- Elongation at break: 28 ± 5%
- Flexural strength: 66 ± 4 MPa
- Flexural modulus: 2,400 ± 160 MPa
- Izod impact strength (X-Y): 20 ± 2 kJ/m²
- ACE compatible: yes
- Spool identification: supported
- Reusable spool: yes
Tips for best results
-
Print in vase mode or with a single outer wall for the strongest two-colour effect.
- Rounded models such as vases, figures and spheres show off the colour shift best.
- Print hotter or slower for more gloss, and cooler or faster for a softer sheen.
- Dry the spool at 55–65°C for 6–8 hours if it’s been open for a while.
- PLA softens at around 53°C, so keep prints out of hot cars and direct sun.
What’s in the box
- 1 × Anycubic PLA Silk Dual Filament – Pink/Gold (1kg spool)
