Anycubic PLA Silk Filament – Copper (1.75mm, 1kg)
Lustrous silk finish | Warm metallic copper sheen | Less brittle, fewer snaps when feeding | ACE compatible | Standard PLA printing
Prints with a beautiful silky shine. Anycubic PLA Silk gives prints a smooth, glossy, silk-like sheen straight off the bed, with no polishing or painting needed. It’s ideal for display pieces, artwork, vases, figurines and fan creations where the finish is the star.
Warm copper shine. A rich copper with a lustrous silk sheen makes prints look like polished metal. It’s perfect for steampunk props, vintage-style décor, statues and busts, vases, coins and medallions, and gifts.
Less snapping, smoother feeding. It’s formulated to be less brittle than typical silk PLA, so it’s less likely to snap in the feed path. That makes it a good match for multicolour systems like the Anycubic ACE.
Smart spool. On compatible Anycubic printers, spool identification sets the print settings for you automatically. The spool is reusable, with a locking system to help prevent tangles.
Key features
- Smooth, glossy silk finish
- Warm metallic copper sheen
- Less brittle, with fewer snaps when feeding
- Anycubic ACE compatible
- Automatic settings on compatible Anycubic printers
- Reusable spool with anti-tangle locking
Specifications
- Material: PLA (silk)
- Colour: copper
- Diameter: 1.75mm
- Net weight: 1kg
- Nozzle size: 0.4mm or larger
- Printing temperature: 210–240°C
- Bed temperature: about 55°C
- Recommended print speed: 50–250mm/s
- Max flow rate: 8mm³/s
- Drying: recommended, 55–65°C for 6–8 hours
- Density: 1.22 g/cm³
- Melt index: 9 ± 1 g/10 min (190°C / 2.16kg)
- Melting point: 164°C
- Vicat softening temperature: 54°C
- Heat deflection temperature: 53°C (0.45 MPa)
- Tensile strength: 37 ± 4 MPa (X-Y), 12 ± 4 MPa (Z)
- Young’s modulus: 2,000 ± 200 MPa
- Elongation at break: 28 ± 5%
- Flexural strength: 66 ± 4 MPa
- Flexural modulus: 2,400 ± 160 MPa
- Izod impact strength (X-Y): 20 ± 2 kJ/m²
- ACE compatible: yes
- Spool identification: supported
- Reusable spool: yes
Tips for best results
-
Slow down for the best shine. Silk PLA looks glossiest at moderate speeds. Try 50–150mm/s on outer walls instead of maxing out.
- Dry the spool at 55–65°C for 6–8 hours if it’s been open for a while.
- Silk PLA is made for looks. For parts that need to take load, use PLA High Speed, PETG or PETG-CF.
- PLA softens at around 53°C, so keep prints out of hot cars and direct sun.
What’s in the box
- 1 × Anycubic PLA Silk Filament – Copper (1kg spool)
