Anycubic Standard Resin V2 – HD Grey (1kg)
Tougher, less brittle prints | For 365–405nm LCD/DLP printers | HD Grey that shows every detail | Low odour | Ready-made Photon Workshop profiles
An upgraded everyday resin that’s tougher and less brittle. Anycubic Standard Resin V2 is reformulated to take more knocks than standard resin. It’s a reliable all-rounder for action figures, miniatures, device cases, snap-fit parts and prototypes.
Tougher prints. V2 is less brittle than standard resin. Parts can flex a little instead of snapping, and they handle small drops and everyday use better.
Smooth, detailed results. The resin flows easily and bubbles clear quickly, giving smooth surfaces and crisp fine detail. Strong build-plate adhesion helps stop prints coming loose mid-print.
HD Grey for maximum detail. Grey shows edges, textures and small details more clearly than any other colour. That makes prints easy to check and gives you an ideal base for painting. It’s the favourite choice for miniatures and tabletop gaming.
Easy to start. It works with most 405nm LCD and DLP resin printers, including the Anycubic Photon range. Anycubic Photon Workshop has ready-made profiles for it, so you get good results from your first print. It’s also low odour, which makes printing at home more comfortable.
Key features
- Tougher and less brittle than standard resin
- Smooth surfaces and crisp fine detail
- HD Grey finish, ideal for checking detail and painting
- Strong build-plate adhesion
- Low odour
- For 365–405nm LCD/DLP printers
- Ready-made profiles in Anycubic Photon Workshop
Specifications
- Colour: HD grey
- Net weight: 1kg
- Type: photopolymer resin
- Wavelength: 365–405nm
- Recommended room temperature for printing: 20–40°C
- Exposure (starting point): bottom layers 20–40s, normal layers 2.5–3s
- Viscosity: 250–350 mPa·s (25°C)
- Density: 1.05–1.25 g/cm³
- Hardness: 80–83 Shore D
- Tensile strength: 35–45 MPa
- Elongation at break: 25–30%
- Flexural strength: 40–50 MPa
- Flexural modulus: 1,500–2,100 MPa
- Young’s modulus: 1,200–1,400 MPa
- Izod impact strength: 192 J/m
- Volume shrinkage: 4.3–5.6%
- Washing: 95% IPA, at least 3 min
- Post-curing: 405nm UV, about 3 min at 18–30°C
How to use and dispose of it safely
- Shake well before use.
- Wear gloves when handling uncured resin.
- Wash in IPA. This resin is not water-washable.
- Throw away fully cured resin as solid plastic waste. Never pour uncured resin or used IPA down the drain.
What’s in the box
- 1 × Anycubic Standard Resin V2 – HD Grey (1kg)
