Anycubic Water Wash Resin 2.0 – Smoky Black (1kg)
Water-washable UV resin | For 365–405nm MSLA/LCD printers | Translucent smoky-black finish | Rinse with water, no IPA needed
Resin printing without the alcohol. Anycubic Water Wash Resin 2.0 rinses clean with plain water, so you don’t need to buy or store isopropyl alcohol (IPA) for washing. That makes it a simple choice for beginners and home setups.
Wash with water. Rinse prints in water for at least 5 minutes, then cure them under 405nm UV for about 3 minutes. That’s all the post-processing it needs.
Tinted-glass look. Smoky Black is translucent, like tinted glass, rather than solid black. Light passes through softly, which gives prints a sleek, moody finish. It’s ideal for display pieces, gems, dice, light covers and sci-fi or tech-style models.
Strong once cured. Fully cured parts are firm and hold their shape, with 82–85 Shore D hardness and 38–43 MPa tensile strength.
Works with most resin printers. It suits MSLA/LCD printers using 365–405nm light, including the Anycubic Photon range.
Key features
- Washes clean with water, no IPA required
- For 365–405nm MSLA/LCD resin printers
- Translucent smoky-black, tinted-glass finish
- Cures in about 3 minutes at 405nm
- Hardness 82–85 Shore D, tensile strength 38–43 MPa
Specifications
- Colour: smoky black (translucent)
- Net weight: 1kg
- Type: water-washable UV-curing resin
- Wavelength: 365–405nm
- Recommended room temperature for printing: 20–40°C
- Exposure (starting point): bottom layers 25–40s, normal layers 2–2.5s
- Viscosity: 190–230 mPa·s (25°C)
- Density: 1.07–1.09 g/cm³
- Hardness: 82–85 Shore D
- Tensile strength: 38–43 MPa
- Elongation at break: 16–22%
- Flexural strength: 48–60 MPa
- Flexural modulus: 2,300–3,000 MPa
- Young’s modulus: 1,100–1,300 MPa
- Izod impact strength: 133 J/m
- Volume shrinkage: 2.2–5.5%
- Washing: water, at least 5 min (or 95% IPA, at least 3 min)
- Post-curing: 405nm UV, about 3 min at 18–30°C
How to use and dispose of it safely
- Shake well before use.
- Wear gloves when handling uncured resin.
- For the clearest finish, wash thoroughly and don’t over-cure.
-
Don’t pour the wash water down the drain. Leave it to stand, then place it in sunlight until the resin in it has fully cured.
- Throw away the cured resin as solid plastic waste.
What’s in the box
- 1 × Anycubic Water Wash Resin 2.0 – Smoky Black (1kg)
